View
 

Korari

This version was saved 15 years, 11 months ago View current version     Page history
Saved by PBworks
on December 23, 2008 at 6:28:13 pm
 

 

 

Converting a 16' canoe/kayak to a tacking outrigger

 

 

Background

 

Mill Creek

 

This journey began with an interest in building a Stitch and Glue kayak - I had priced out the materials locally (easily $500) and I was getting very close to purchasing plans from CLC. The boat I was interested in was the Mill Creek 16.

 

 

Hartley

Then I spotted a 16' ply 'kayak' for sale on TradeMe (NZ equivalent of EBay) which I got for $200. This saved a LOT of building time and money and got me on the water.

Here is one of the actual photos from the TradeMe listing. 

 

This boat is a design by Hartley dubbed a 'canoe/kayak' and it was close enough to the Mill Creek to convince me this was a bargain I should not pass up. The hull shape is quite kayak like: fairly low with a bit of V and not much rocker, but the very open cockpit seems more like a decked canoe. I call it a canoe-yak. The lines are quite pleasing to the eye, Hartley is no slouch in the design world, even though this is the very small end of his extensive portfolio.

 

At 16' (actually 15'10") with two seats it seemed perfect for my wife and I or the kids to paddle in. But it felt pretty 'tippy', even with just one in it. I think the position of the seats at the extreme ends of the cockpit did not help. This lead to the idea of a small outrigger on a couple of poles that bolted across the centre of the cockpit. This was an instant improvement: suddenly the boat was rock steady, and it still paddled really easily. You could even stand up and walk around, dive off for a swim and climb back on board. It made a great fishing platform for our 2007-08 summer holiday at Hahei (on our first trip out we came back with 2 crayfish, and we never got wet ;-) But I wanted more.

 

Sailing Canoes

 

Lurking in the back of my mind was the desire to put up a sail - which began when I saw the CLC Mill Creek could be fitted with a lug rig.

 

And recently I discovered the class of boats called 'sailing canoes' / 'decked canoes'. If I was to put a conventional rig on my hull it might fit in that category

 

 

 

Outrigger Canoes

 

But I had discovered Gary Dierking and his range of beautiful sailing outriggers - I instantly wanted an Ulua.

Living here in New Zealand on the southern end of the South Pacific makes an outrigger an appealing choice.

 

Gary has a range of sailing outrigger designs that can be built easily with standard materials and techniques. I reckon this guy is really on to something - and he lives right here in NZ too! I keep reading his book and poring over his website and blog.

I still want an Ulua ( - and a T2 - and a Tamanu), I love the concept: a boat small and light enough to car-top, you can paddle it, you can sail it, bolt on a small outboard - woohoo! It is a stable platform, it moves easily under all forms of power, it is simple and it has that South Pacific feel.

One day I hope to meet Gary and shake his hand - vigorously - he's my hero.

 

 

Making do with what I have

 

But I have a canoe-yak and I'm working with a shoestring budget - pocket change - beer money - (and I still like a beer or 2). So I decided to try and create an outrigger canoe with tacking crab claw rig... starting with my Hartley... on the cheap... gulp. Actually when I decided to go for it I was all enthusiasm and short on knowledge. The further I get into this the more I learn about different styles of hull / rig and the how and why of what they are. Hopefully I make something work before I say 'what was I thinking!' and give up. I have a hull the designer wasn't sure what to call (canoe/kayak). It is wide and low, rather than narrow and tall like a real outrigger canoe. By adding a crab claw sail and outrigger it will have a 'mixed heritage' - some might say mongrel!

 

Nov 2008 

Here is an earlier shot showing half made ama and sail...

 

...and contemplating a rear mount for the version 1 rudder (check out the $0 lashed rudder hinge)

 

7 Dec 2008

On Saturday night I stepped the mast and unfurled the sail to show my mate. With it sheeted hard in to the centre line the waka actually sat there calmy on the back lawn resisting the urge to capsize in the passing breezes - which would be disastorous as it would wipe out my wifes newly planted vege garden - far more dangerous than any capsize at sea - probably fatal. I roughly bungeed the iakos to their thwarts and placed the ama under the iako ends. It is all looking good. When I sat in the hull the wife could not resist taking a couple of photos of my late night 'dry-run'. See: thanks to that no-cost rudder hinge I can still afford a beer, just the one tho' (yeah right!). 

 

 

 

On the Water

14 Dec 2008

Finally after a full Saturday of madly painting all the bare woody bits - sand undercoat topcoat - and whacking together a wooden roofrack to attach to the simple metal bars on 'da Falcon' Korari was ready to get wet. The ama is still just in epoxy, paint to come soon. Sunday morning I loaded him onto the roof, rudder leeboard paddle inside, ama on top, furled sail alongside, strapped it all down and headed for a quiet little beach on nearby lake Okareka. As we pulled up I could see my idea of a low key launch was blown, it seemed half the local population was packed onto the beach! And the local waka ama club was out in force practising with one end of their straight line speed run at a bouy barely 20m directly off the beach. Undaunted by the prospect of large scale public humiliation I set to unloading and assembling. Fortunately there was very little wind so nothing too dramatic should happen. 

 

I lashed on the ama and saw Korari floated just a couple of inches off level towards the ama. All good, with load in the hull it might be about right. I did a quick paddle trying to look nonchalant and pretending I wasn't noticing looks from the waka ama paddlers and the crowd on the beach. Back to shore and I put on rudder, leeboard and stepped the rig.

 

 

Even more curious looks from the masses but I just unfurled the sail and did a final check, yep I'm as ready as I can be so I pushed off and paddled out clear of the weed bank then pulled down the leeboard and rudder. The rope haul-down didn't quite get the rudder all the way down but I found I could lean over the stern and give it a shove down. Sheeted in and tried the rudder control lines: the steering was very responsive. Despite the almost non-existant wind I covered about 200m before I knew it.  

 

 

Beyond this distance from the shore I started to pick up more breeze and fiddled with mainsheet and steering trying to figure how to drive this thing. The control lines run from rudder in a loop around the perimeter of the cockpit so I can steer with a foward or backward pull anywhere along the line, but the steering response is 'backwards', slightly frustrating. About this time I realised I'd forgotten to put on my life jacket. I managed a couple of furtive tacks and was starting to think about heading back to the beach when a good gust built up. The ama rose slowly to about a foot off the water as Korari picked up speed. I think the waka was sitting on the starboard 'flat' of the shallow V hull. The base of the mast was showing a good amount of flex and I realised I better move my butt further out in case capsize was imminent. Korari was making some real speed now - yeehaa - then as I glanced over again to see how high the ama was flying I saw the leeboard disappearing astern! Rats! Oh well - this was a fairly safe first breakage.

 

I was headed slightly downwind and quickly figured out I had to go back upwind to retrieve my leeboard and that was only going to happen easily under paddle power. So I brailed up the sail, discovered I could crawl foward and release the forestay from the bow (phew! I should run the attachment back nearer to the cockpit), undid the rig tie-down, popped the rig out, layed it over the iakos outside the pola and roughly lashed it there. Sweet as - those late night practices putting up and taking down the rig on the back lawn paid off there. So I paddled upwind, fished out my leeboard and then paddled a bit of a zig-zag course about 1km back to the beach. Foot pedals attached to those rudder lines would be a good thing.

 

No worries, all in all I'm wrapt with my first run, even if it was fairly short. So the leeboard attachment was the first thing to break... I'll beef that up... and then see if anything else is not up to spec. I think I can say it is looking promising, and that brief burst of speed, with the ama flying comfortably has given me a taste for more.

 

 

The Rudder

Here are a couple of shots of my version 2 'strap-on' rudder assembly. I am trying to avoid alterations to the original hull, so came up with a 'manu'-like rudder mount that slides on over the stern and is held in place by 6 screws up into the underside of the gunwale. The white-on-white colour scheme is doing its best to hide the details but hopefully you can make out what is going on. The manu bit is 2 parallel hunks of 1'' wood joined by a piece of marine ply glued and screwed across the bottom edges and forming a slot that the front piece of the rudder slides between snugly. A galvanised carriage bolt passes through all 3 pieces to give a pivot. The galv nut is epoxied into a shaped chunk of wood so friction can be set by hand (and when I drop the nut it even floats!). The manu is connected by a couple of wooden 'bridges' to 2 by 1" pieces that lie under the gunwale against the hull.

 

The Wharram style rope-lash rudder hinge is a real winner. A rope is tied to the top rear of the rudder to act as a pull-up that works well. Another attaches below the pivot (a bit in front of the hinge) to act as a pull-down, but it is way too close to the pivot to create enough leverage to fully seat the rudder down. Oh well, more head scratching and late nights in the shed might solve that one.

 

Here are the seperate bits.

 

 

Here it is assembled. The little 'wing' bits at the top of the rudder are where I attach control lines - very kayak like, just scaled up and made pretty roughly. For example the rudder (and leeboard and paddle) was shaped to an eyeballed foil shape with my trusty angle grinder. This was satisfyingly fast work and with careful sweeping passes the finish was passable (at arms length!) - imagine Tim the Tool Man grunting at this point.  The circular part around the pivot on the front of the rudder is a 6mm ply cheek plate, one glued on each side. These spacers mean the slot in the manu is wide enough to go over the rudder hinge when the rudder is raised. This way the raised rudder is held straight instead of it flopping to one side. Cool. You can see the rudder in the up position in the launch photo above.

 

I reckon this manu is badly under-engineered so it is high on my list of 'things likely to break'. I will gorilla glue some strategic gussets soon. Losing the rudder could be much more stressful than a stray leeboard.

 

 

 

Lets Try That Again

21 Dec 2008

After making a much stronger leeboard mount, and beefing up my 'manu' rudder mount (proactive maintenance!) I returned to the same spot, with similar conditions: very little wind. This time I got much further than 500m off shore, and nothing broke. And wouldn't you know it, no crowd this time! the beach was empty like it usually is. Murphy's Law of home-built boats: the likelihood of failure is proportional to the number of people watching.

 

Here is my post to proa_file, it covers it really:

 

Took my 16' tacker for its first real sail (leeboard mount broke after 10mins first time!). There was hardly any wind, but once every while a gust would last long enough to get some speed going for a few minutes. Above a certain speed there was a slight but distinct vibration. Is this my leeboard or rudder? I did shape them to a "foil-like" section - but admittedly with an angle grinder! Any suggestions?

 

Anyway had a great afternoon out. My son sat in the front and enjoyed it too. I had to chuckle - I showed him the brail line and said if things get scary just pull that in. Well I noticed he kept a firm grip on that line the whole time, lol. And he quickly let me know every time the ama showed even a hint of lifting. Smart lad, he kept us well within the 'safe zone'. On my own I'd be likely to get blown over trying to do too much too soon.

 

 

We were out for almost 2 hours, dodging jetskis and powerboats and feeling a bit lame when the waka amas passed us. Hey only during the long lulls between gusts though! When we got some wind it felt great. It was interesting to see the ama get half buried to leeward under a strong gust. Sometimes I would shift my butt to starboard (windward) in sympathy but I had stay awake then as the wind was very flukey and could quickly switch direction.

 

So nothing broke and everything actually worked well. Can't wait to get out again, preferrably with a nice steady breeze.

 

Suggestions I've picked up for curing the vibration: it's the leeboard, angle the leeboard, more streamlining, bevel the trailing edge 30 degrees, don't worry until it's shaking your teeth out at 30+ knots! True to my inherent laziness I will try angling the leeboard first. If that does not help I will try bevelling the trailing edge.

 

 

 

To be continued...

Comments (0)

You don't have permission to comment on this page.